Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® B3GM35 BKQ642 23220 - PA6-(MD+GF)40 - BASF

Material Data Center offers the following functions for Ultramid® B3GM35 BKQ642 23220:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid B datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Proprietà Specifiche Materiale - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Glass-fibre and mineral reinforced injection moulding grade with high UV resistance for industrial articles having medium rigidityand high dimensional stability, used e.g. for automotive exterior doorhandles.
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 0.5 / * % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 0.8 / * % ISO 294-4, 2577
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 8600 / 4200 MPa ISO 527
Carico unitario a rottura 125 / 65 MPa ISO 527
Deformazione a rottura 3 / 10 % ISO 527
Resistenza all'urto Charpy, +23°C 50 / 70 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 45 / 45 kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 4.1 / 7 kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C 3.6 / 3.6 kJ/m² ISO 179/1eA
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 220 / * °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 195 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 215 / * °C ISO 75-1/-2
Proprietà Elettrichesecco/condUnitáNorma del test
ISO Data
Resistività volumica >1E13 / - Ohm*m IEC 62631-3-1
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'acqua 5.7 / * % Sim. alla ISO 62
Assorbimento d'umidità 1.7 / * % Sim. alla ISO 62
Massa volumica 1480 / - kg/m³ ISO 1183
Proprietà Specifiche Materialesecco/condUnitáNorma del test
ISO Data
Numero di viscosità 140 / * cm³/g ISO 307, 1157, 1628
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 80 °C -
Pre-essiccamento - Tempo 4 h -
Umidità del Processo ≤0.15 % -
Temperatura di fusione 270 - 280 °C -
Temperatura dello stampo 80 - 90 °C -
Caratteristiche
Forma fisica disponibile
Nero
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico
Altre informazioni
Stampaggio ad Iniezione
PREPROCESSING
Pre/Post-processing, max. allowed water content: .15 %
Pre/Post-processing, Pre-drying, Temperature: 80 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 270 - 280 °C
injection molding, Melt temperature, recommended: 280 °C
injection molding, Mold temperature, range: 80 - 90 °C
injection molding, Mold temperature, recommended: 80 °C
injection molding, Dwell time, thermoplastics: 10 min
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.